Browse by Category
Glossary
Like Us On Facebook

Search Knowlegebase Articles
 


No GPS or No Com on Dell x51

Common Reasons: Bluetooth shortcut is not created correctly, Bluetooth is not turned on or system PS setting not correct.

Fix: Close Anywhere Map then click on the Bluetooth icon in bottom right corner of main start screen. Click on Com Ports tab and see if the GPS is listed and on what com port. If not listed, click on Devices tab and look for it there. If it is not listed, follow the Help Topics article to create a new connection.

Go to Start>Settings>System>GPS, ensure both the program and hardware ports are set to None. Then open Anywhere Map and check under File>Settings>GPS Settings, make sure the com port matches the one in Bluetooth Manager and data rate is set to 4800, no other boxes are checked except the bottom 3>Done.

Email    Print    Add Comment

How helpful was this article to you?

Related Articles

article Can I utilize an external GPS with the ATC?
The ATC can not utilize an external GPS either via bluetooth or hardwired cables. You can use an external GPS antenna...

  7-10-2009    Views: 3776   
article Dell Axim X50 and X51 with Windows Mobile 5 special configuration.
This article is Only relevent for the 1.7.x versions of AnywhereMap. You do not need to do this procedure for 1.8 and...

  2-15-2006    Views: 9631   
article Dell Axim Setup for Bluetooth GPS & Weather Box
 GPS CONFIGURATION:Start Bluetooth GPS: blue light is blinking 1. Start Dell; Anywhere Map is OFF 2. Tap Bluetooth...

  5-23-2006    Views: 9021   
article Dell PDA Autopilot Integration
At the present time there is no way to integrate the Dell PDA with output to drive an autopilot. The HP PDAs had the...

  6-26-2006    Views: 5393   
article Port not available on X51
Common Reason: Port is already in use either by GPS settings or by an imcoming port. Fix: If there is an incoming...

(No rating)  5-19-2011    Views: 361   

User Comments

Add Comment
No comments have been posted.