Resolution: It is recommended that after exiting all programs and returning to the Main System Screen, the Lock icon is pressed, then and hold power button for 10 seconds. This will ensure that in the event the ATC is powered on accidentally, it will power off within 3 minutes if the Unlock>Yes sequence is not completed, to conserve the battery.
ATC Hardwired Power Supply
The ATC hardwired power supply has 2 leads, one has a white stripe on it while one does not. The wire with the white...
(No rating)
9-10-2009
Views: 1496
Wired XM unit will not connect to iPAQ
Situation: AnywhereWx software will not connect to a wired XM unit (wire from power plug uses silver barrel connector...
(No rating)
6-06-2005
Views: 4503
iPAQ 4700 won't power up or soft reset
If the iPAQ 4700 will not power up using the power switch and/or it will not soft reset, the first thing you should...
11-15-2004
Views: 15721
How do I set the backlight/power settings?
Power on the ATC. Navigate to the main System Screen (PP/AWM/HP).Launch HP Street Navigation.To set the Power...
(No rating)
12-22-2009
Views: 1235
Power Settings for the PDA Screen
Most handhelds will turn off their display or their backlight if no activity is detected for a certain period of...
3-16-2006
Views: 3816
Glossary
Anywhere Map for PDAs
Anywhere Travel Companion (ATC)
Email
Print
Add Comment
11-15-2004
Views: 15721