Home   sep   About Us   sep   My Account   sep   View Cart   sep   Contact Us
View Cart View Cart / Checkout

Anywhere Map Support


Browse by Category
Glossary
Like Us On Facebook

Search Knowlegebase Articles
 


Power off unit

Issue: ATC does not turn off.

Resolution: It is recommended that after exiting all programs and returning to the Main System Screen, the Lock icon is pressed, then and hold power button for 10 seconds. This will ensure that in the event the ATC is powered on accidentally, it will power off within 3 minutes if the Unlock>Yes sequence is not completed, to conserve the battery.
Article 116
Created 7-10-2009
Modified 11-11-2009
Author Terri Karleskint
Rating (None)
Email    Print    Add Comment

How helpful was this article to you?

Related Articles

article ATC Hardwired Power Supply
The ATC hardwired power supply has 2 leads, one has a white stripe on it while one does not. The wire with the white...
(No rating)  9-10-2009    Views: 4089   
article Wired XM unit will not connect to iPAQ
Situation: AnywhereWx software will not connect to a wired XM unit (wire from power plug uses silver barrel connector...
(No rating)  6-06-2005    Views: 6085   
article iPAQ 4700 won't power up, soft reset, sync or charge
If the iPAQ 4700 will not power up using the power switch and/or it will not soft reset, the first thing you should...
  11-15-2004    Views: 20944   
article How do I set the backlight/power settings?
Power on the ATC. Navigate to the main System Screen (PP/AWM/HP).Launch HP Street Navigation.To set the Power...
(No rating)  12-22-2009    Views: 3563   
article Power requirements for Pro System
12v System: 10.8-16V 28v System: 22-30V Power to the AW160 power supply must be within the above ranges to...
(No rating)  5-20-2011    Views: 934   

User Comments

Add Comment
No comments have been posted.